XAR500 Germany wear plate - Wear plate (import)

General Information

XAR 500 is a special structural steel, with high wear resistance, in general, the higher the hardness, wear resistance, the higher the corresponding steel, wear-resistant special structural steel XAR 500 is usually quenched or quenched and tempered, with fine martensite or martensite - bainite. In addition, a certain percentage of molybdenum in steel, nickel, boron alloy content, to ensure uniform thickness of the physical and mechanical properties. In addition, a large number of wear tests prove, XAR series of wear-resistant steel in 1.5% of the chromium content to more effectively improve the wear resistance, especially in weak acid medium.

Use

Widely used for outdoor wear of building structures, such as: excavators, bulldozers, earth moving equipment, machinery, mining machinery and equipment, garbage tilt trucks, bucket trucks, screening machines, grinding machines, crushing machine, grinding device, grab, mixer, road construction machinery, agricultural equipment and so on.

Chemical composition (%)
Melting analysis

C Si Mn P S Cr Mo B

≦0.28 ≦0.80 ≦1.50 ≦0.025 ≦0.010 ≦1.00 ≦0.50 ≦0.005

Hardness
(At room temperature)

450 ~ 530HB
Brinell hardness is determined according to ISO6506 standards. Hardness should be about 1mm below the surface is measured.

Mechanical properties
(15mm thick steel plate typical parameters)
*) 1MPa = 1N/mm2

Carbon equivalent CET (%) CET = C + (Mn + Mo) / 10 + (Cr + Cu) / 20 + Ni/40 0.41
Carbon equivalent CE (%) CE = C + Mn / 6 + (Cr + Mo + V) / 5 + (Ni + Cu) / 15 0.62
Yield Strength (Mpa) *) 1300
Tensile strength (MPa) *) 1600
Elongation A (%) 9
Minus 40 ℃, the Charpy V-- longitudinal sample (J) on the notched impact energy 25

Existing inventory standard size plate ●

Width	Length	6	8	10	12	15	20	25	30	40	45	50	60
2000/2500	6000/9000	●	●	●	●	●	●	●	●	●	●	●

Width

Length