XAR450 wear plate - Wear plate (import) - Shanghai Zhilian steel trade

General Information

XAR450 is a special high wear resistance of structural steel. This wear-resistant special structural steel, the average hardness of 450HB, high hardness and good toughness in this steel structure built more rugged, lightweight and can withstand shock loads.

Use

Used to wear - exposed structures, such as excavators, bulldozers, mining machines and protective plate, shell wall, support and reinforcement plates; cutting board, dump truck body liner, wear plate; hybrid components and transmission components, chute, display, machine tools, crushers and shredders, scrap briquetting presses, blade, paving grinding and agricultural machinery.

Chemical composition (%)
Melting analysis

C Si Mn P S Cu Cr Mo B

≦0.22 ≦0.8 ≦1.50 ≦0.025 ≦0.012 ≦0.30 ≦1.30 ≦0.50 ≦0.005

Hardness
(At room temperature)

410 to 490HB
Brinell hardness is determined according to ISO6506 standards. Hardness should be about 1mm below the surface is measured.

Mechanical properties
(15mm thick steel plate typical parameters)
*) 1MPa = 1N/mm2

Carbon equivalent CET (%) CET = C + (Mn + Mo) / 10 + (Cr + Cu) / 20 + Ni/40 0.35
Carbon equivalent CE (%) CE = C + Mn / 6 + (Cr + Mo + V) / 5 + (Ni + Cu) / 15 0.55
Yield Strength (Mpa) *) 1200
Tensile strength (MPa) *) 1350
Elongation A (%) 10
Minus 40 ℃, the Charpy V-- longitudinal sample (J) on the notched impact energy 30

Existing inventory standard size plate ●

Width	Length	6	8	10	12	15	20	25	30	40	45	50	60
2000	6000	●	●	●	●	●

Width	Length	70	80
2500	6100