Alloy steel
Position:Home >> Products >> Alloy steel
55nicrmov6
Public Time:2011年05月14日 | Sort:Alloy steel | Hits:929

Details:

Grade: Alloy tool steel 55NiCrMoV6

Standard: GB / T 1299-1985

Features and Scope: steel with good toughness, strength and high wear resistance. It at room temperature and 500 ~ 600 ℃ at almost the same mechanical properties. Heated to 500 ℃, can still hold about the hardness of HB300. As the steel contains molybdenum, which is not sensitive to the temper brittleness. Slowly cooled down from 600 ℃ after the impact toughness is only slightly reduced.

Steel has good hardenability. 300mm × 400mm × 300mm chunks of steel materials, oil quenched from 820 ℃ and 560 ℃ tempering, the hardness of some cross-section of almost the same.

The various kinds of steel used to make large and medium-sized forging die.

This kind of steel is easy to form the white point, the need for strict control of the smelting process and the cooling system after rolling forging

Approximate composition of the foreign steel: U.S. L6 (AISI), Japan SKT4 (JIS) in Japan GFA (Datong) Japan DM (Hitachi), Germany 1.2713 (W-Nr) France 55NiCrMoV7 (NF).

The main technical parameters:
 
After quenching
58
Quenching temperature
830~860
Delivery status
Annealing HB≤241
Coolant :
Oil

Chemical Composition: C: 0.50 ~ 0.60 Si Si: ≤ 0.40 Mn Mn: 0.50 ~ 0.80 Sulfur S: ≤ 0.030 P P: ≤ 0.030 Chromium Cr: 0.50 ~ 0.80 Ni Ni: 1.40 ~ 1.80 Copper Cu: to allow the residual content of ≤ 0.30 vanadium V: allow the residual content of <0.2 Mo Mo: 0.15 ~ 0.30 mechanical Properties: Hardness: annealed, 241 ~ 197HB, indentation diameter of 3.9 ~ 4.3mm heat treatment and microstructure specifications: standard heat treatment: quenching, 830 ~ 860 ℃ oil cooling . Delivery status: delivery of steel in the annealed condition

【Close】
All rights reserved: Shanghai Zhilian steel trade Co., LTD.
Copyrigh @ 2010 2011 Shanghai Zhilian steel trade Co., LTD. All rights reserved