Material Name: high quality carbon structural steel
Grade: 35Mn
Standard: GB / T 699-1988
● Features and application:
Strength and high hardenability than 30Mn, cold plastic deformation of the medium can be cut is good, but welding is poor. Should be quenched before use. Applied to the shaft. Bolts. Nuts. Screws, spindles. Gear.
Medium-sized machinery for the manufacture of bolts, nuts, levers and so on.
● Chemical Composition:
Carbon C: 0.32 ~ 0.40
Si Si: 0.17 ~ 0.37
Manganese Mn: 0.70 ~ 1.00
Sulfur S: ≤ 0.035
Phosphorus P: ≤ 0.035
Chromium Cr: ≤ 0.25
Ni-Ni: ≤ 0.30
Copper Cu: ≤ 0.25
● Mechanical Properties:
Tensile strength σb (MPa): ≥ 560 (57)
Yield strength σs (MPa): ≥ 335 (34)
Elongation δ5 (%): ≥ 18
Reduction of area ψ (%): ≥ 45
Impact energy Akv (J): ≥ 55
Impact toughness αkv (J/cm2): ≥ 69 (7)
Hardness: no heat treatment ≤ 229HB; annealed steel ≤ 197HB
Sample Size: Sample size is 25mm
● Heat treatment and microstructure specifications:
Heat treatment specifications: normalizing, 870 ℃; quenching, 850 ℃; tempering, 600 ℃.
● Delivery status: no heat treatment or heat treatment (annealing, normalizing or tempering) the status of delivery. Demands heat treatment delivery should be specified in the contract, not indicated by no heat treatment delivery.
- Phone:021-57866678
021-57866679
Fax: 021-57860199
Cont:Mr.Huang 13818168036
Mr.Zhao 13919185505
Email: shzlgt99@163.com
Website:www.shzlgt99.com
Address:Shanghai fengxian, taikang town highway number 118
35mn
Public Time:2011年05月13日 | Sort:Spring steel | Hits:1023