NO6600 {600} alloy is Ni - Cr - Fe-based solid solution strengthened alloy with good high temperature corrosion and oxidation resistance, excellent hot and cold processing and welding performance, at 700 ℃ the following with satisfactory strength and high thermal plasticity. Alloys can be strengthened by cold working, you can also use resistance welding, solvent welding or brazing, suitable for production of the following at 1100 ℃ under low load antioxidant components.

NO6600 {600} of property:

     ● have a good resistance to reduction, oxidation, corrosion performance nitride dielectric

● at room temperature and high temperature have a very good resistance to stress corrosion cracking

● have a good resistance to dry chlorine and hydrogen chloride gas corrosion performance

● below zero, room temperature and has good high temperature mechanical properties

  C-276 {N10276} is a tungsten-nickel - chromium - molybdenum alloy, low carbon content of silicon is considered to be a panacea corrosion-resistant alloys. The main moisture chlorine, a variety of oxidizing chloride, chloride salt solution, sulfuric acid and oxidizing salt, hydrochloric acid at low temperature and the temperature in both good corrosion resistance. Thus, nearly three decades, the corrosion in harsh environments, such as chemical, petrochemical, flue gas desulfurization, pulp and paper, environmental protection industry has a very wide range of applications.

The alloy has the following features:

1, two oxidation and reduction atmosphere in the state, the most corrosive media has excellent corrosion resistance.

2, has excellent resistance to pitting, crevice corrosion and stress corrosion. High Mo, Cr content in the alloy to resist the chloride corrosion, W elements to further improve the corrosion resistance.

3, Hastelloy C-276 alloy is resistant to the few wet chlorine, hypochlorite and chlorine dioxide corrosion of materials, one of the high concentration of chloride salts such as ferric chloride and copper chloride are significant corrosion resistance. For various concentrations of sulfuric acid solution, one of the few hot concentrated sulfuric acid solution can be applied to one of the materials.

C-276 {N10276} physical properties as follows:

   Material composition: 57Ni-16Cr-16Mo-5Fe-4W-2.5Co *- 1Mn *- 0.35V *- 0.08Si *- 0.01C * * a margin for the maximum

Executive Standard: UNS N10276, ASTM B575, ASME SB575, DIN / EN 2.4819

Density: 8.90g/cm3