50 # steel-made
50 # steel-made |
|
|
Products High-strength carbon-carbon structural steel, the steel can be cut middle, cold plastic deformation is low, poor welding, heat treatment, no temper brittleness, but lower hardenability, water and the critical diameter of 13 * 30mm, and when the water quenching cracking tendency. This steel is usually in normalizing or quenching and tempering, or other high-frequency surface hardening heat treatment before use.
Chemical composition (Wt%)
C |
Si |
Mn |
P |
S |
0.47 |
0.17 |
0.50 |
- |
- |
0.55 |
0.37 |
0.80 |
0.035 |
0.035 |
Supplier hardness
Not heat-treated state, hardness ≤ 241HBW; annealed hardness ≤ 207HBS.
Scope of supply
Thickness: 0.15mm-5.0mm
Width: 10mm-250mm
Corresponding to the grade
American AISI / SAE / ASTM standard steel 1050, Japanese JIS standard steel S50C/S53C
Test
GB/T699-1999 |